Walk in fume hood is a regarded as a great way to handle odors and toxic fumes from processing units and distillation assemblies. These floor standing fume hoods can feature services like air, gas, nitrogen or any other type of gas. Weiber mobile fume hoods are ductless, microprocessor based, advanced and CE marked equipments are designed for both laboratory and industrial application. These tailor made Floor standing FRP lined ductless Fume hoods are developed to provide personnel protection from toxic fumes. With scrubber fume hood Weiber offers excellent air pollution control in labs and industries. Walk in Fume hood are developed and designed to be used as semi conductor ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire which may lead to emission of inflammable gases during the course of experiments. Hence, the materials of custom made fume hoods are carefully chosen between industrial grades fire resistant commercial wooden boards covered with laminated sheets and lined completely with epoxy coating/FRP lining or corrosion resistant steel sheets having epoxy coating from inside, duly painted with attractive stove enamel/drying spray paint. The work table is made of heavy gauge construction material fortified with acid proof glazed tiles/stainless steel grade ss-304 grade. The work bench is provided with a small made of stainless steel ss-304 grade. All fume hoods are provided with sliding sash made of special grade shatter proof glass duly framed in wooden/ aluminum frame with sliding motion and counter weight balanced mechanism. Volume of Exhaust It is generally known that custom made fume hoods are capable of maintaining a constant exhaust volume. Testing Procedures of Contaminants The Canopy Walk in Fume hoods are specifically designed to decrease the loss of static pressure at a given baffle opening position. According to the standard procedures the average loss of static pressure at any given four points at ninety degree and 3 duct dia from the fume hood, that will not exceed 75 feet per minute at 0.25 inch, with full slash opening and face velocity of 100 feet per minute. Noise and Sound Levels Our modular walks in fume hoods are designed with lower noise levels and the performance of these fume hoods are comparatively better than the industry standards of 60db, and approximately 15cm distance from the sash. Illumination Levels at Work Space Our energy efficient walk in fume hoods make sure that a maximum of 800 lux light is available on the work table through diffuser fluorescent light arrangement. Exhaust Assembly These modular walk in fume hoods are incorporated with an extremely durable and strong exhaust system that generally persists a range of 500-1250 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves. Exhaust Ducting These mobile & portable walk in fume hoods are also integrated with a FRP ducting of required dimension as per the requirements of the user. Features Reliable durable Energy efficient Ventilation across the cabinet Transparent doors for clear view Stainless steel construction & microprocessor based NSF & BABL certified Economical & Ergonomic design Technical Matrix: Constructions Industrial grade mica clad wooden board/ steel Table Stainless steel sheet table of ss-304 grade/ fortified acid proof glazed tiles Sink Stainless steel sink with tap Coating Epoxy coating/ FRP lined Air flow Unidirectional Air flow control Three step air flow speed controller Blower assembly Centrifugal lubricated bearing type ISI marked assembly Illumination Fluorescent light illumination greater than 800 lux on work table. Noise level Noise level less than 60 db Power requirements 500 watts -750 watts( model specific) Internal work space 4’x 2’x2’/5’x 21/2x 21/2 x 6x 3’x 3’ (length x depth x height) Nominal voltage 220- 230 volts, 50Hz single phase Frequency 50 Model no Dimension (length x depth x height) ACM- Cafh-1200 4’ x 2’ x 2’ ACM -Cafh-1503 5’ x 21/2 x 21/2 ACM - Cafh 1803 6’ x 3’ x 3’

Fume hood ceiling are designed considering most efficient air flow to the suction. These equipments are supplied in double skin arrangement with inner lining that is made of non corrosive heat resistant plastic and the outer skin is made out of power coated CRC. Fume hood ceiling are developed and designed to be used as semi conductor ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire which may lead to emission of inflammable gases during the course of experiments. Hence, the materials of fume hoods are carefully chosen between industrial grades fire resistant commercial wooden boards covered with laminated sheets and lined completely with epoxy coating/FRP lining or corrosion resistant steel sheets having epoxy coating from inside, duly painted with attractive stove enamel/drying spray paint. The work table is made of heavy gauge construction material fortified with acid proof glazed tiles/stainless steel grade ss-304 grade. The work bench is provided with a small made of stainless steel ss-304 grade. All fume hoods are provided with sliding sash made of special grade shatter proof glass duly framed in wooden/ aluminum frame with sliding motion and counter weight balanced mechanism. Volume of exhaust It is generally known that fume hoods are capable of maintaining a constant exhaust volume. Testing procedures of contaminants Fume hoods ceiling are specifically to decrease the loss of static pressure at a given baffle opening position. According to the standard procedures the average loss of static pressure at any given four points at ninety degree and 3 duct dia from the fume hood, that will not exceed 75 feet per minute at 0.25 inch, with full slash opening and face velocity of 100 feet per minute. Noise and sound levels Our fume hood ceilings are designed with lower noise levels and the performance of these fume hoods are comparatively better than the industry standards of 60db, and approximately 15cm distance from the sash. Illumination levels at work space Our fume hoods ceiling make sure that a maximum of 800 lux light is available on the work table through diffuser fluorescent light arrangement. Exhaust assembly These fume hoods ceiling are incorporated with an extremely durable and strong exhaust system that generally persists a range of 500-1250 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves. Exhaust ducting These fume hood ceiling are also integrated with a FRP ducting of required dimension as per the requirements of the user. Features Reliable durable Energy efficient Ventilation across the cabinet Transparent doors for clear view Technical Matrix Constructions Industrial grade mica clad wooden board/ steel Table Stainless steel sheet table of ss-304 grade/ fortified acid proof glazed tiles Sink Stainless steel sink with tap Coating Epoxy coating/ FRP lined Air flow Unidirectional Air flow control Three step air flow speed controller Blower assembly Centrifugal lubricated bearing type ISI marked assembly Illumination Fluorescent light illumination greater than 800 lux on work table. Noise level Noise level less than 60 db Power requirements 500 watts -750 watts( model specific) Internal work space 4’x 2’x2’/5’x 21/2x 21/2 x 6x 3’x 3’ (length x depth x height) Nominal voltage 220- 230 volts, 50Hz single phase Frequency 50 Model no Dimension (length x depth x height) Acm- Cafh-1200 4’ x 2’ x 2’ Acm -Cafh-1503 5’ x 21/2 x 21/2 Acm - Cafh 1803 6’ x 3’ x 3’

A fume hood scrubber provides excellent air pollution control for water soluble chemicals present in the laboratory fume hood exhaust fumes. These fume hoods are designed to save space and provide effective air pollution control and operator safety protection for fume hoods. Fume hood scrubber are developed and designed to be used as semi conductor ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire which may lead to emission of inflammable gases during the course of experiments. Hence, the materials of fume hoods are carefully chosen between industrial grades fire resistant commercial wooden boards covered with laminated sheets and lined completely with epoxy coating/FRP lining or corrosion resistant steel sheets having epoxy coating from inside, duly painted with attractive stove enamel/drying spray paint. The work table is made of heavy gauge construction material fortified with acid proof glazed tiles/stainless steel grade ss-304 grade. The work bench is provided with a small made of stainless steel ss-304 grade. All fume hoods are provided with sliding sash made of special grade shatter proof glass duly framed in wooden/ aluminum frame with sliding motion and counter weight balanced mechanism. Volume of exhaust It is generally known that fume hoods are capable of maintaining a constant exhaust volume. Testing procedures of contaminants Fume hood scrubber are specifically to decrease the loss of static pressure at a given baffle opening position. According to the standard procedures the average loss of static pressure at any given four points at ninety degree and 3 duct dia from the fume hood, that will not exceed 75 feet per minute at 0.25 inch, with full slash opening and face velocity of 100 feet per minute. Noise and sound levels Fume hood scrubber are designed with lower noise levels and the performance of these fume hoods are comparatively better than the industry standards of 60db, and approximately 15cm distance from the sash. Illumination levels at work space Fume hoods scrubber make sure that a maximum of 800 lux light is available on the work table through diffuser fluorescent light arrangement. Exhaust assembly These fume hood scrubber are incorporated with an extremely durable and strong exhaust system that generally persists a range of 500-1250 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves. Exhaust ducting These fume hood scrubber are also integrated with a FRP ducting of required dimension as per the requirements of the user. Features Reliable durable Energy efficient Ventilation across the cabinet Transparent doors for clear view Technical matrix: Constructions Industrial grade mica clad wooden board/ steel Table Stainless steel sheet table of ss-304 grade/ fortified acid proof glazed tiles Sink Stainless steel sink with tap Coating Epoxy coating/ FRP lined Air flow Unidirectional Air flow control Three step air flow speed controller Blower assembly Centrifugal lubricated bearing type ISI marked assembly Illumination Fluorescent light illumination greater than 800 lux on work table. Noise level Noise level less than 60 db Power requirements 500 watts -750 watts( model specific) Internal work space 4’x 2’x2’/5’x 21/2x 21/2 x 6x 3’x 3’ (length x depth x height) Nominal voltage 220- 230 volts, 50Hz single phase Frequency 50 Model no Dimension (length x depth x height) ACM- Cafh-1200 4’ x 2’ x 2’ ACM -Cafh-1503 5’ x 21/2 x 21/2 ACM - Cafh 1803 6’ x 3’ x 3’

Emergency shower are equipments that are designed to remove contamination from personnel prior to entering a clean room and are available in both standard and customized models. These provides on-the-spot decontamination. Weiber is a leading manufacturers and exporters of both standard and customized polypropylene emergency shower. All chemistry laboratories require emergency shower facility. These Emergency Shower Decontamination Booth features. Emergency showers are a combination of stainless steel that will be accord with the lustration grade, firm and resistant chemical. Emergency showers are suitable for cleaning eyes, face, hands, and spray head can be used for washing the whole body. Eye wash and spray shower can be used at the same time or they can be used separately. Switch of the spray shower is placed at the top of the handle and the flow is steady and simple. Features Equipped with HEPA filter PLC programmable logic controller Self regulating Fully dispersed Floor Standing PP constructed & chemical resistant NABL & NSF certified CE marked

Weiber Manifold Fume Hood is designed as a ventilation device to limit the exposure to hazardous or toxic fumes, vapors or dusts. The work area is enclosed by five sides and the standing work height is at the bottom of the equipment. Weiber Fume Hood Manifold System comes with multiple chemical hoods. These fume hoods are joint in series to facilitate working of more than one user simultaneously. The equipment is aimed at saving both time and space. The ventilation device is mainly designed for three basic purposes offering personnel, product and environmental protection. Fume Hood Manifold System design and operation is primarily focused on maximizing the proper containment of the air and fumes within the fume hood. Weiber is counted amongst the leading manufacturers/distributors/suppliers/ developers/exporters/ engineers/service providers of microprocessor based laboratory testing fume hoods in India. These fume hoods are incorporated with an extremely durable and strong exhaust system that generally persists a range of 500-1250 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves. Fume hood Manifold System is most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching. They are also used in industrial applications or other activities where hazardous or noxious vapors, gases or dusts are generated or released. Standard Features Ergonomic design Low noise levels energy efficient mechanism Durability and high performances CE and ISO certified NABL & NSF certified Floor standing & epoxy coated Easy to operate