http://www.zcrusher.com/jaw-crusher.html Application of Jaw Crusher: Jaw crusher is a trusted and reliable brand for its high quality and good manufacturing. It specializes in producing Jaw Crusher which is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Each model has a large feed opening for its size and an ideal nip angle, giving smooth material flow, high reduction efficiency and high capacity. Their simple design conceals many advanced features that give easy operation, simple maintenance, long life and a low cost per ton. The structure of Jaw Crusher: The structure of Jaw Crusher includes Main Frame, Main Axle, Roller Bearings, Eccentric Shaft, Jaw Plates, Side Plates, Toggle Mechanism, Fly Wheels and Springs.

http://www.zcrusher.com/ball-mill.html Working Principle: The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished. Ball Mill Application: The ball mill is a key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.

http://www.zcrusher.com/fine-crusher.html The series single-stage fine crusher is developed based on the single-stage (counter-attack) hammer crusher to crush raw materials for industry such as limestone, gypsum, raw coal and so on and further to simplify the work flow of smashing. The product granularity is small (80% <5mm) in comparison with the ordinary single stage hammer crusher. The equipment investment is lower about 35~50% than that of the same scale traditional process. The charge of long-term movement is lower about 30% than that of the same scale traditional process equipment system. It has widely applied in cement, sand and stone material, electric power professions and so on.

http://www.zcrusher.com/jaw-crusher.html Application of Jaw Crusher: Jaw crusher is a trusted and reliable brand for its high quality and good manufacturing. It specializes in producing Jaw Crusher which is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Each model has a large feed opening for its size and an ideal nip angle, giving smooth material flow, high reduction efficiency and high capacity. Their simple design conceals many advanced features that give easy operation, simple maintenance, long life and a low cost per ton. The structure of Jaw Crusher: The structure of Jaw Crusher includes Main Frame, Main Axle, Roller Bearings, Eccentric Shaft, Jaw Plates, Side Plates, Toggle Mechanism, Fly Wheels and Springs. The Features of Jaw Crusher: 1. Jaw Crusher is of various types; 2. Jaw Crusher is suitable for crushing maximum, medium and minimum stones; 3. The operating principle of Jaw Crusher is easy to be operated; 4. The structure of Jaw Crusher is simple and it is easy to maintain; Operating principle: Jaw crusher uses motor as its power. Through the motor��s wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Plastic dye bobbin------------------------------------------------------------ No. -----------------Name----------Material-----Weight(g)------Description-------------- D001------170 plastic bobbin------PC-----------123--------Φ47.6xΦ56xL170------- D002------170 plastic bobbin------PC-----------133--------Φ50xΦ61xL170 -------- D003------230 plastic bobbin------PC-----------165--------Φ48xΦ60xL230 -------- --------------(with stop-off strip) D004------230 plastic bobbin------PC-----------140--------Φ48xΦ60xL230--------- --------------(Without stop-off strip)