Tavemex installs Monforts Eco Denim Line to reduce 80pc water usage

Mexico based denim producer Tavemex, makes investment in the Eco Denim Line to satisfy their customers who have been requesting them, more and more to use less water in dyeing and finishing, said Arturo Ornelas Elizondo, Tavemex’s Industrial Director.

Tavemex is the second denim producer in the world to install a Monforts Eco Denim Line, and the first to use the technology for finishing denim fabrics of up to 300 g/sqm. Tavemex completed installation of the Eco Denim Line early this year. The company now reports an 80% reduction in water usage after one month of operation.

The new installation includes a Monforts Eco Applicator, which applies the chemicals, replacing a conventional padder. This is said to reduce the drying needs and, therefore, energy consumption, due to the fact that the Eco Applicator applies less moisture to the fabric. This will also give them the opportunity to improve their wastewater plant to the latest European standards, commented Mr Elizondo.

For Tavemex, the investment in the new Monforts technology comes at a time of fundamental change for the company. Previously known as Tavex, the company was part of a multinational enterprise that originated in Spain and had denim-manufacturing plants there and in Morocco, Brazil and Argentina, as well as Mexico. Now, Tavemex is an independent Mexican-owned concern, with the US as its prime market.

Tavemex’s capacity is now 2 million metres per month, and part of current production is gradually being moved from the existing stenters to the new Eco Denim Line. The equipment was delivered from Monforts in Germany via the manufacturer’s distributor in Mexico, Sattex-Mexico.

They have been trying to use less water in their garment production, softening fabrics to break the starch and avoid using water. Their need is to meet stringent environmental standards, and also to respond to strong customer demand for more environmentally friendly products.

They use their own well for water supply, so the water cost is relatively low, but they are saving more than 80% on water usage, and this will enable their customers to label their products in the stores respectively.

Usually denim is processed through a number of cylinder dryers that are steam heated, and stretched in a large stretching unit that applies high force to the fabric in order to achieve the necessary weft.

The Monforts Eco Line uses a modified Thermex Hotflue Chamber that generates the necessary moisture and temperature for making the denim stretchable, whilst incorporating a soft stretching of the fabric by using many rollers, instead of only the one or two in a traditional stretching unit.

This consequently saves on the volume of water needed to generate the steam, and also on the amount of energy required to convert the water to steam. The Tavemex factory uses fuel oil for its steam supply, being located too far from a natural gas supply to pipe in gas, the manufacturer explains.

They are still in the process of transferring the production from the traditional stenters to the Eco Denim Line, but they estimate that ultimately they shall save between 20 and 30% on steam generation. The Eco Denim Line is projected to save energy.